Cylindrical roller bearings
Capacity of laod of the bearings is calculated in DIN/ISO 281/1 e ISO 76, the size tolerance is of DIN 620. When effectuated at full roller filling the capacity is at maximum. The choice of steels bound together by cement, hardened, to build the external rings of the bearings, enhables them to work in cases of shock thay could be esposed to.
The seal ZRS (screen and rubber) provides the bearings of a strong barrier against dirt and giver strenght to its internal lubricant. The bearings are relubricable with lithium fat of grade “3”.
Fixe combined bearings
With a better size/performance balance, are the best choice in the general lifting and holding sistems together with the relatively low cost.
Technical details for “C” shape fixe combined sections
Adjustable combined bearings
They are the alternative evolution of the fixe combined bearings, to use when precision of holding with possibility of latter lateral adjustment is required.
Adjustable combined bearings for heavy load
They have been developed together with combined sections with which they share the holding of heavy loads optimizing space. They have the contrast roller adjustable in 8 positions.
Technical Details Adjustable combined “C” shape bearings for heavy load
Radial bearings with pin
They have the same capacity of the combined bearings they are obtained from. To use in the applications not requiring lateral contrast of the loads or in cases in which the edge guide is entrusted to an autonomous system.
Bearing plates
Together with combined bearings or to radial bearing pins, allow bolted assembly. This feature is highly appreciated in automation and handling sistems, because it facilitates subsequent maintenance.
